|
|
8810, 8610/8620, 7810, 6210/6220, 7310/7320 Telephones
Due to the unique headset volume control featured in Tone Commander
ISDN and VoIP telephones, most makes and models of headset amplifiers and companion headsets
should be compatible. Several amplifier/headset units that we have tested
are listed below. Various styles of proprietary matching headsets are available for each
amplifier model from each maker.
|
|
| |
|
Clarity
CE225
|
In-line
handset volume control; adjust volume and frequency controls to desired
levels.
|
|
|
| |
|
Jabra
(GN Netcom)
GN 1200
"Smart Cord"
|
Direct
connect cords; set switch to "1"
(8810, 8610/8620, 7810) or "4" (6210/6220, 7310/7320).
|
|
|
| |
|
Jabra (GN Netcom)
GN 8000
|
Install batteries, set switch to "A",
adjust Transmit control to desired level.
|
|
|
| |
|
Jabra (GN Netcom)
MPA-II
|
Set switch to "E",
adjust
Transmit control to desired level.
|
|
|
| |
|
Plantronics
A20
|
Connect
AC adapter, set Mode switch to "Speak", adjust
transmit level. Set mode switch to "Listen", adjust receive level.
|
|
|
| |
|
Plantronics
CS50/55/70
Wireless
|
Connect
AC adapter to the base unit. Set Receive Major Adjust to "3",
and Transmit Major Adjust to "A".
|
|
|
| |
|
Plantronics
M12/M22 Vista
|
Install batteries, set switch to "5",
adjust Transmit control to desired level.
|
|
|
| |
|
Sennheiser
UI 740
Base Amplifier
|
Install
battery, set switch to "A",
adjust
Transmit control to desired level.
|
|
|
| |
|
Sennheiser
CSTD 01
Cord
|
A standard quick disconnect cord used to direct connect a Sennheiser
headset to an 8810, 8610/8620, or 7810 for full time use when a base amplifier
is not needed.
|
|
|
| |
|
Sennheiser
CSTD 24
Cord
|
A reverse polarity quick disconnect cord used to direct connect a
Sennheiser headset to a 6210/6220 or 7310/7320 for full time use when a
base amplifier is not needed.
|
|
|
|
|
|
|
|
|
| |
2260d, 40d120 ISDN Attendant Consoles
|
top |
| |
|
Clarity
CE225
|
In-line
handset volume control; adjust volume and frequency controls to desired
levels.
|
|
|
| |
|
Jabra (GN Netcom)
GN 8000
|
Install batteries, set switch to "G",
adjust
Transmit control to desired level.
|
|
|
| |
|
Jabra (GN Netcom)
MPA-II
|
Set
the internal switch to "C",
adjust
Transmit control to desired level.
|
|
|
| |
|
Plantronics
A20
|
Connect transformer, set Mode switch to "Speak", adjust
transmit to desired level. Set mode switch to "Listen", adjust
receive to desired level.
|
|
|
|
|
Plantronics
M12/M22 Vista
|
Install batteries, set switch to "5",
adjust
Transmit control to desired level.
|
|
|
| |
|
Sennheiser
UI 740
|
Install battery, set switch to "A",
adjust
Transmit control to desired level.
|
|
|
|
|
|
|
|
|
| |
524, 1030, 1560, 30e120 Analog Attendant Consoles
|
top |
| |
|
Clarity
CE225
|
In-line
handset volume control; adjust volume and frequency controls to desired
levels.
|
|
|
| |
|
Jabra (GN Netcom)
GN 8000
|
Install batteries, set selector switch to "G",
adjust
Transmit control to desired level.
|
|
|
| |
|
Plantronics
A20
|
Connect transformer, set Mode switch to "Speak", adjust
transmit to desired level. Set mode switch to "Listen", adjust
receive to desired level.
|
|
|
| |
|
Sennheiser
UI 740
|
Install battery, set switch to "A",
adjust
Transmit control to desired level.
|
|
|
|
Headset Manufacturers
Clarity
Jabra
Plantronics Sennheiser
|
|
